Pro-C - Setting a Watering Day Schedule

When you want to program specific days of the week to water make sure the symbol above "MON" is flashing. If not, press the button until you see the icon or icon flashing above "MON".

Press the button to activate a particular day of the week to water (the display always starts with Monday). Press the button to cancel watering for that day. After pressing a button the display automatically advances to the next day. A icon indicates a water day. A icon indicates a no water day. The display right shows watering days as MON, TUE, WED, FRI, and SAT, no watering on THU and SUN.

On some models of the older Pro-C controller (green buttons), when you select a no water day, you will not see a icon above the day selected as a no water day. There will be no symbol above no water days. You still will see a icon above the days set to water.

Setting Specific Days Off

1. Turn the dial to the WATER DAYS position.
2. Enter an interval watering schedule as described on in Setting Interval Watering above.
3. Press the button once. MON will be flashing.
4. Use the button until the cursor is at the day of the week you wish to set as a No Water Day.
5. Press the button to set this day as a no water day. The will illuminate over this day.
6. Repeat steps 4 and 5 until all desired event day(s) are off.

NOTE: If any days are selected as non-watering days ( icon) at the bottom of the display, the Interval Day watering will excluded those days. For example, if the Interval Days are set at 5 and Monday is a non-water day, the controller will water every 5 th day, but never on a Monday. If the interval water day falls on a Monday and Monday is a non-water day, the program would not water for 5 more days resulting in no water for 10 days.

Still need help? We're here.

Tell us what you need support with and we'll find the best solution for you.